Wireless Access

Reply
Highlighted
Occasional Contributor II

Re: Multiple VLANs in one Port

Will this process allow the employees to connect to the SSID with the same vlan(policy) that they have in their lan ports?

Highlighted
MVP Guru

Re: Multiple VLANs in one Port

This will allow you to assign different VLANs to users with a single SSID.

Sent from my iPhone

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Highlighted
Occasional Contributor II

Re: Multiple VLANs in one Port

So after doing the configuration with my switch, I'll do this one? How would I know that the user must be connected to their corresponding vlans?

Highlighted
MVP Guru

Re: Multiple VLANs in one Port

You’ll specify the User VLAN in the User Role.

Sent from my iPhone

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Highlighted
Occasional Contributor II

Re: Multiple VLANs in one Port

So I'll specify their Mac addresses so the IAP will know to which VLAN they'll be assigned? Is that correct? Same SSID but different VLANs

Highlighted
MVP Guru

Re: Multiple VLANs in one Port

You’ll specify a User Role based on the MAC and within that User Role you specify the VLAN for the Client.

Sent from my iPhone

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Highlighted
Occasional Contributor II

Re: Multiple VLANs in one Port

Here. How will I assign this role that I created to one of our VLANs?

Highlighted
MVP Guru

Re: Multiple VLANs in one Port

If you create the User Role, there is an option to select a VLAN which is also assigned.

Sent from my iPhone

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Highlighted
Occasional Contributor II

Re: Multiple VLANs in one Port

Where can I find that User Role? I'm a bit lost LOL. Are there any steps to specifically assign a VLAN to a User Role? 

 

Thanks!

Highlighted
MVP Guru

Re: Multiple VLANs in one Port

It’s not a problem :) Here you go, this shows you how to specify a VLAN within the User Role

In the Instant UI

To configure a user role for VLAN derivation:
1. Click the Security at the top right corner of Instant main window.
2. Click the Roles tab. The Roles tab contents are displayed.
3. Under Roles, click New.
4. Enter a name for the new role and click OK.
5. Under the Access rules, click New.
6. Select the Rule type as VLAN assignment.
7. Enter the ID of the VLAN in the VLAN ID text box.
8. Click OK.

https://www.arubanetworks.com/techdocs/Instant_41_Mobile/Advanced/Content/UG_files/Roles_and_policies/ConfUserRoleforVLAN.htm

Sent from my iPhone

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: