Wireless Access

Reply
Highlighted
Occasional Contributor II

Multizone

I'm trying to set up Multizone between two systems. One system is a Mobility Master with multiple MDs. The other system is a standalone pair running HA. I set up the multizone profile and the ap group, but on the datazone wlc I'm getting the following error in the logs:

 

stm[4048]: <399803> <4048> <ERRS> |stm| An internal system error has occurred at file sapm_ap_mgmt.c function sapm_proc_hello_req line 15709 error AP(TEST-AP) HELLO was rejected because HA is not supported for datazone..

 

Is having the datazone WLCs in a HA pair not allowed?

Frequent Contributor I

Re: Multizone

Hi,

Multinode cluster is accepctable  in both datazone and primary zone cluseter.

find the below consideratin for Multizone.

1. Primary Zone:   Standalone 1

    Data Zone:        Standalone 2

 

2. Primary Zone:   Multi Node Cluster

    Data Zone:        Standalone

 

3. Primary Zone:   Multi Node Cluster

    Data Zone 1:     Multi Node Cluster

    Data Zone 2:     Standalone

 

NOTE:

IMPORTANT: A MultiZone AP can belong to one and only one PZ, and a PZ can support a maximum of four DZs.

 

And below are few limitation of Multizone:

  • Same AOS version in all zones ( support only 8.x onwards)
  • DZ and PZ have same AP group names
  • Cannot manage PZ and DZ controllers from same MM
  • Max 5 zones (1 primary + 4 Data)
  • Max 12 controllers for all zones
  • Max 16 VAPs per radio for all zones
  • Mesh AP / RAP not supported

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: