Wireless Access

Hello,

 

i need Windows 10 Driver for USB to UART Bridge Controller Cable for a Aruba 7005 WLAN Controller.

 

The Hardware ID is: USB\VID_2626&PID_EA60

Windows 10 can´t find one.

 

The old Aruba Driver ist only for Windows 7: (https://support.arubanetworks.com/ToolsResources/tabid/76/DMXModule/514/EntryId/4229/Default.aspx)

 

The Driver for AP UART do not help:

(https://support.arubanetworks.com/ToolsResources/tabid/76/DMXModule/514/Default.aspx?EntryId=33499)

 

regards

Carsten

 

For which console port?

For the mini USB Console Port.

Have you tried the Windows 10 driver here?  https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

yes, thats the same driver as from the Aruba Support site:

 

(The Driver for AP UART do not help:

(https://support.arubanetworks.com/ToolsResources/tabid/76/DMXModule/514/Default.aspx?EntryId=33499))

 

I can install it, but the device has no driver:

 

I have installed and delete the device ans start the PC several times.

I have try it with manualy updating the driver but windows do not find any drivers in any dezipped folders of this driver.

 

I had to do some digging to find that cable and when I plugged it in, the driver worked.  Can you try uninstalling and re-installing again?  The Host IDS on my Windows 10 laptop is not allowing me to uninstall to test.

I am talking about the driver here:  https://support.arubanetworks.com/Default.aspx?TabId=76&DMXModule=514&EntryId=7512

Hi,

 

it dosn´t work. The Problem is the Windows 10 error ‘Device not migrated’: https://borncity.com/win/2017/03/15/windows-10-error-device-not-migrated/

 

I give up. I will use the normal Console Port.

 

Thank you for you support.

Let me ask a co-worker.  I am not sure how I got it to work and I cannot remove it to replicate on my laptop.

 

Thanks for your patience.

The 7005 uses the CP210x USB to UART chip, and I just tried on a fresh Windows 10 and was able to make it work with the following steps:

 

- Download the CP210x USB to UART Bridge VCP Drivers for Windows 10 from SiLabs.

- Install the drivers

- Now go into the Device manager, and search for the Aruba Networks USB to UART Bridge controller under Other Devices

- Right-click for properties

- From there click 'Update Driver'

- Then 'Browse my computer for drivers' (manual select)

- 'Let me pick from a list of available drivers on my computer

- Select 'Ports (COM &LPT) from the list of hardware types:

- Select 'Silicon Labs' from the manufacturers, and Silicon Labs CP210x USB to UART Bridge from the models:

- Now you will see a warning that Windows cannot verify the compatibility, ignore that:

- Success message should now appear:

Note the COM port number here and open PuTTY or your favorite teminal emulator:

Hello Herman,

 

great, thank you. This way works.

 

mfg

Carsten

 

 

Also works for the 9004(-LTE) gateway.

------------------------------
Jan-Willem Keinke
------------------------------

Original Message:
Sent: Jun 11, 2020 03:59 AM
From: Herman Robers
Subject: Need Windows 10 Driver for USB to UART Cable (Aruba 7005 WLAN Controller)

The 7005 uses the CP210x USB to UART chip, and I just tried on a fresh Windows 10 and was able to make it work with the following steps:

 

- Download the CP210x USB to UART Bridge VCP Drivers for Windows 10 from SiLabs.

- Install the drivers

- Now go into the Device manager, and search for the Aruba Networks USB to UART Bridge controller under Other Devices

- Right-click for properties

- From there click 'Update Driver'

- Then 'Browse my computer for drivers' (manual select)

- 'Let me pick from a list of available drivers on my computer

- Select 'Ports (COM &LPT) from the list of hardware types:

- Select 'Silicon Labs' from the manufacturers, and Silicon Labs CP210x USB to UART Bridge from the models:

- Now you will see a warning that Windows cannot verify the compatibility, ignore that:

- Success message should now appear:

Note the COM port number here and open PuTTY or your favorite teminal emulator: