04-08-2016 10:24 AM
If the detedted Rogue AP has a LAN MAC Address implies it was previously detected via a wired device may be a switch, later if the same device is being detected via a wireless AP, which in turn is being connected to a Controller. How can we check to which port on the switch this Rogue AP was connected initially by logging on to the controller?
Solved! Go to Solution.
04-23-2016 03:31 AM
The controller would not have the port on the switch. It would only know of the wired mac address. Airwave would know the port, because it manages the switches and can see the switch tables. The controller does not manage switches, so it would not have that information.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Re: On Airwave if the detected Rogue AP has a LAN MAC address. How do we check on controller?
07-08-2019 07:45 AM
I have a similar requirement. We are doing a PoC for WIPS. The customer ask is as below:
1. Detect the wired MAC address & or IP address of the Rogue AP.
The controller shows the BSSID (radio mac). But we need the LAN mac so as to identify the switch port it is connected to.
Any suggestion if this is possible (with / without Airwave) and the commands / steps for that.
I have tried
show wms rogue-ap list
sh ap monitor wired-mac ...