Wireless Access

Reply
Highlighted
New Contributor

Our SNMP Trap server IP changed but controller is still sending logs to old IP

We have an account that had SNMP trap servers change.  The New IPs were added to the controller (old ones removed) but the controller is still sending logs to the old IP address.  Any suggestions?  Controller code is 6.1.3.1


Accepted Solutions
Highlighted
Guru Elite

Re: Our SNMP Trap server IP changed but controller is still sending logs to old IP

Look in the Audit trail and see what commands were executed for both "show audit-trail".  Each controller has a local configuration for traps and syslog, so it must be done for each individually.

 

If you checked those and you cannot find the issue, please open a support case.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post


All Replies
Highlighted
Guru Elite

Re: Our SNMP Trap server IP changed but controller is still sending logs to old IP

Sending SNMP traps with an Aruba Controller is confiugured by using "snmp trap-host...".  Sending syslog from an Aruba controller is configured by using "logging <ip address".  Which one did you change? (traps or syslog)


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
New Contributor

Re: Our SNMP Trap server IP changed but controller is still sending logs to old IP

New Trap Receiver Hosts(currently show up in configuration)
1xx.xxx.xx.211
1xx.xxx.xx.211

Old Trap Receiver Hosts(were removed from configuration couple weeks ago)
1xx.xxx.xx.201
1xx.xxx.xx.201

Highlighted
Guru Elite

Re: Our SNMP Trap server IP changed but controller is still sending logs to old IP

Look in the Audit trail and see what commands were executed for both "show audit-trail".  Each controller has a local configuration for traps and syslog, so it must be done for each individually.

 

If you checked those and you cannot find the issue, please open a support case.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: