Wireless Access

Hi,

We have 7240 which has PEFNG license and have 7010 in DMZ zone, do I still need a PEFNG license for creating user based roles?

If you are using centralized licensing with another controller that has PEFNG licenses, then no. 


Thanks, 
Tim

Thanks for reply,

 

I have PEFNG license in another controller in which centralized license is enable,

I have 300 AP  and PEFNG License on the controller, if i enable centralized on guest / DMZ controller i will utilizes any license? Could you please explain more about this?

 

 

No, it will not consume a license but centralized licensing is required to enable the PEFNG functionality on the controller if there are no licenses installed locally. 


Thanks, 
Tim

I have enable centralized licensing, but still I could not able to add any policies on DMZ controller.

1. After adding license server whether controller need a reboot?
2. We have firewall in between master and Guest controller (Guest controller is in DMZ zone) whether I need allow any firewall port in between Master and Guest controller for license server communication? (ICMP is allowed).

Is this a master-local topology?

Its Master- standby topology (VRRP redundancy) in which all access points are registered to this controllers and we have DMZ / Guest controller all guest /client  traffic tunneled are redirected to this controller for internet access.

Centralized license is enable between master and standby controller and created logon rules, policies for client traffic and access. We are yet to create logon rules and policies in guest controller but unable to do due to license issue.

 

 

 

Is the DMZ controller a local or independent?

its independent ?

 

Controller role is master 

 

 

If it’s an independent controller, you need to specify the license server’s address on the DMZ controller’s centralized licensing tab. Did you do that?

Yes I did that,  whether I need enable Centeralized licensing?

Can you run the command below on the DMZ controller and post the output?

 

show license client-table

 

(awc) #show license client-table
Centralized licensing is disabled or the master is current unreachable

How about:

show license profile

(awc) #show license profile

License provisioning profile
----------------------------
Parameter Value
--------- -----
Centralized Licensing Disabled

Are you sure you enabled centralized licensing on the DMZ controller and entered the IP of the license master? The information you posted says it is disabled. 


Thanks, 
Tim