Wireless Access

Reply
New Contributor

POE status off in 800 controller.

Hi, Suddenly all APs are not getting power from controller. APs are working with external power source.

When i run (controller)#show enet-link-profile default nothing shows  related POE. it shows speed and duplex settings only. Please help me to resolve this.  :( 

Guru Elite

Re: POE status off in 800 controller.

Type "show power inline"


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: POE status off in 800 controller.

Thank you for reply!!!

 

"show poer inline" Command dosen't accept .... :(


cjoseph wrote:

Type "show power inline"



cjoseph wrote:

Type "show power inline"




Guru Elite

Re: POE status off in 800 controller.

Try "show poe"  http://www.arubanetworks.com/techdocs/ArubaOS_64x_WebHelp/Web_Help_Index.htm#ArubaFrameStyles/1CommandList/showpoe.htm?Highlight=show poe


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: POE status off in 800 controller.

it gives me everything as "N/A"

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: