Wireless Access

last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Polling Campus APs via ICMP

This thread has been viewed 1 times

  • 1.  Polling Campus APs via ICMP

    Posted Apr 29, 2013 01:58 PM
    • Hello, on Customer Side we will poll the APs via ICMP wether they are reachable or not. The got there IP Adress via DHCP. So while booting they are available from the local and remote Subnets. After connecting to the Controller, they are only available from the local Subnet. If we poll them from remote/different Subnets it seems, that the replay is send through the Tunnel (seen in logging of the connected Firewall connected on the Controller Port). Is this normal behavior  and is this changeable? So that we can monitor the APs from different Subnets via ICMP?

     

    Best Regards 



  • 2.  RE: Polling Campus APs via ICMP

    EMPLOYEE
    Posted Apr 30, 2013 10:17 PM

    Are they being run in CPSec mode or RAP mode?



  • 3.  RE: Polling Campus APs via ICMP

    Posted May 01, 2013 10:00 AM

    Hello, they run not as RAP, so the are Campus APs. CPsec is default and i use Release 6.1.0.7, so i mean it is enable.

     

    Best Regards