Wireless Access

Reply
Regular Contributor II

Port Channel quesiton & PagP

Was having probs getting port channel up and running between a CatOS 6500 and 7220, until I found this archived thread:

 

http://community.arubanetworks.com/t5/ArubaOS-and-Controllers/EtherChannel-between-Aruba-and-Cisco-switch/m-p/438/highlight/true#M45

 

Just wanted to confrim that Aruba doesnt natively support PagP (being a cisoc propriety protocol), and therfore the advice in the thread is correct.  Being that I did confirm that "mode on" was the only setting that would work, this sort of answers the question!

 

I have ensured spanning tree has been disabled on the 7220 at both the interface and port channel levels.

Highlighted
Guru Elite

Re: Port Channel quesiton & PagP

Correct, PAgP is Cisco proprietary.

 

Mode ON creates a static port-channel. You may want to consider using LACP.


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: