Wireless Access

Reply
Contributor I

Re: Preprovisioning a RAP 109 with a 3400 controller

Correct and now I can't get into it.  I will try reset it.

Occasional Contributor II

Re: Preprovisioning a RAP 109 with a 3400 controller

Having the same with RAP-108. Did you fix this ? May I know how or what I can try more ?

 

Thanks, regards

  Alex

Alcatel-Lucent Enterprise Italy
Highlighted
Contributor I

Re: Preprovisioning a RAP 109 with a 3400 controller

Hi

 

If you mean the data response corruption error,  there wasn't a fix besides resetting the device and trying again.  It did work on the third attempt.

 

For connecting to the controller on the RAP interface this worked.  Maintenance tab > Convert > then pointed the IAP to the controllers IP?

 

DL77

Occasional Contributor II

Re: Preprovisioning a RAP 109 with a 3400 controller

Yes I mean the data corruption error.

I get it a lot of times and it always fails. Other RAP models go fine, so am not sure if it's the model or the specific unit.

Why do you think it fails a few times and then works at the third time ? is there a reason ?

 

Thanks, regards

  Alex

 

Alcatel-Lucent Enterprise Italy
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: