Wireless Access

Hi guys,

I create one lab for test Site to Site VPN connection. My lab has 2 controllers 620 with VPN module enable.

Configuration:

Communication between Controller 1 and Controller 2 is ok. 

Controller 1 IP: 10.18.110.100

IPsec Map:

Crypto Map Template"TEST-VPN" 100

IKE Version: 1

IKEv1 Policy: 10001

Security association lifetime seconds : [300 -86400]

Security association lifetime kilobytes: N/A

PFS (Y/N): N

Transform sets={ default-transform }

Peer gateway: 10.10.10.5

Interface: VLAN 110

Source network: vlan 110

Destination network: 192.168.30.0/255.255.255.0

Pre-Connect (Y/N): Y

Tunnel Trusted (Y/N): Y

Forced NAT-T (Y/N): Y

Uplink Failover (Y/N): N

IP Compression (Y/N): N

Controller 2 IP: 10.10.10.5

Ipsec Map:

Crypto Map Template"TEST-VPN" 100

IKE Version: 1

IKEv1 Policy: 10001

Security association lifetime seconds : [300 -86400]

Security association lifetime kilobytes: N/A

PFS (Y/N): N

Transform sets={ default-transform }

Peer gateway: 10.18.110.100

Interface: VLAN 10

Source network: vlan 10

Destination network: 192.168.113.0/255.255.255.0

Pre-Connect (Y/N): Y

Tunnel Trusted (Y/N): Y

Forced NAT-T (Y/N): Y

Uplink Failover (Y/N): N

IP Compression (Y/N): N

Phase 1 is ok but Phase 2 doesn’t work:

Logs:

The above log shows problems related to IKE Phase 2. Does anyone know what might be happening?

Thanks!

What type of authentication do you have configured? It is probably good that you start with a simple example like the one here:  http://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Web_Help_Index.htm#ArubaFrameStyles/VPNs/Site_to_Site_VPNs.htm#vpns_1856148693_1006191 and then customize that to make your own.

Hi Colin,

Thanks for help me!

I had followed this guide to make my Site to Site VPN. I used Ikev1 with 3DS+SHA and Pre-shared key. Both controllers are configured with Master role.

I check the pre-shared key passaword and test in other 2 controller. The error is same.  

Thanks,

Felipe.

It would seem that the parameters on the map in the controllers do not match.  the VPN goes through all the maps one by one looking for a match.