Wireless Access

last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Problem with Mesh

This thread has been viewed 2 times

  • 1.  Problem with Mesh

    Posted Sep 02, 2019 08:05 AM

    Hey,

     

    i have a problem establishing a mesh between two APs, one AP-365 (Mesh Point) and one 205H (Mesh Portal).

     

    We are using two 7210 controllers with 8.4.0.0 software. I created a new AP group for the two access points and created a new Mesh Cluster. I checked in the profile that the default Mesh radio is there. 

     

    I provisiond the 205h as the Mesh Portal, everthing okay with it. Then i provisioned the 365 as the Mesh Point and it won´t create a connection with the portal. 

     

    Any advice where i can find further information for the troubleshooting?

     

    Thanks in advance,

    Daniel



  • 2.  RE: Problem with Mesh

    EMPLOYEE
    Posted Sep 13, 2019 09:19 AM

    @cjoseph 



  • 3.  RE: Problem with Mesh

    EMPLOYEE
    Posted Sep 13, 2019 09:28 AM

    What shows 

    show ap mesh active

    show ap mesh topology

    show ap mesh neighbors

    show ap active

    show log system

     

    What is the distance between those APs?

    Can you provide CLI outcome from Mesh Point?