Wireless Access

Reply
Regular Contributor I

Re: Problems with Split Tunnel SSID

Ok, thanks.

It means the bridge ssid configuration set the complete AP in bridge mode with all ssids on it.

 

Re: Problems with Split Tunnel SSID

when you set bridge, it is only applied to the VAP you are changing.

 

You can have a combination of several ssids with different forwarding modes.


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
Regular Contributor I

Re: Problems with Split Tunnel SSID

Ok, thanks,

So I can set up a Employee ssid in bridge mode and a guest ssid in tunnel mode on the same ap right?

Have you a set up guide or a step by step guide to set up a ssid in bridge mode?

Re: Problems with Split Tunnel SSID

So I can set up a Employee ssid in bridge mode and a guest ssid in tunnel mode on the same ap right?  --> Yes

 

Have you a set up guide or a step by step guide to set up a ssid in bridge mode?  --> Good place to start is the RAP design guide here.

 

To make an ssid to be bridged.

forward-mode bridge
no broadcast-filter all
no broadcast-filter arp

 


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
Highlighted
Regular Contributor I

Re: Problems with Split Tunnel SSID

But i want to use the APs as Campus APs not as RAPs

Regular Contributor I

Re: Problems with Split Tunnel SSID

I Bridge mode only supported on RAPs? 

I test it, but the ssid is not broadcasting on my aps!

Guru Elite

Re: Problems with Split Tunnel SSID

It is allowed on Campus APs if you have control plane security enabled on your controller.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Guru Elite

Re: Problems with Split Tunnel SSID

Do you have control plane security (CPSec) enabled?


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Regular Contributor I

Re: Problems with Split Tunnel SSID

now it is enabled and the ssid is broadcasting, but i don not get an ip adress when i try to connect

Guru Elite

Re: Problems with Split Tunnel SSID

Does the local subnet have a DHCP server or DHCP relay configured?


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: