Putting a router on a stick config on an IAP-205
10-29-2015 07:31 AM
I have been tasked with making the Arubas Cluster and setting one as the Gateway out to the internet for the Guest network So I need to beable to set the single ethernet interface to have two IPs on different vlans one for the internal network to maintain the cluster and the second Public IP to route the Guest SSID traffic. Any help would be appriciated.
Re: Putting a router on a stick config on an IAP-205
11-04-2015 11:17 AM
IAP questions go the Instant section.
personally im not quite sure you can even do this. the Instant product is limited in some areas and putting IPs on interfaces is one of those things i believe. you have some basic routing, but policy routing like you ask, don't believe it is possible.