Wireless Access

Reply
Contributor I

QUESTION WHEN INTRODUCING LICENSES MANUALLY IN AOS 8.6

Hello.

 

I want to configure a controller 7010 in standalone mode, with a very simple configuration. I have upgraded it to 8.6.0.2.

 

I have introduced the licenses via GUI and via CLI.

 

When I introduced them via GUI, when putting in the PEFNG, RFP, WebCC, I was asked to mark the option “1 xxx licenses are available in global license pool”. I am not asked in regards the AP licenses.

 

On other side, when doing this via CLI, I get the next response: “Please make sure to enable the feature bit to have the license take effect”. I did not received such a response with AP license.

 

Are both messages related with the same question?

What are the consequences of marking, when introducing via GUI?

What do I have to do when doing this via CLI?

How can I “enable the feature bit to have the license take effect”?

What are the consequences of enabling the feature bit to have the license take effect?

Can a modify the selected option later? I have seen that when showing the licenses via GUI I can modify “Feature enable”.

 

I attach to images GUI and CLI.

 

Thanks for the responses.


Accepted Solutions
Highlighted
MVP Guru

Re: QUESTION WHEN INTRODUCING LICENSES MANUALLY IN AOS 8.6

Confusing I know, but you need to enable it at /mm on a Standalone.

 

(Aruba7030) *[mynode] #show roleinfo
switchrole:standalone
(Aruba7030) *[mynode] #cd /mm (Aruba7030) *[mm] #configure t Enter Configuration commands, one per line. End with CNTL/Z (Aruba7030) *[mm] (config) #license-pool-profile-root (Aruba7030) *[mm] (License root(/) pool profile) #

 


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)

View solution in original post


All Replies
Highlighted
MVP Guru

Re: QUESTION WHEN INTRODUCING LICENSES MANUALLY IN AOS 8.6

Only AP licenses are enabled by default when those licenses are added to a constoller, All other licenses must be manually enabled. 

 

You can do this via the CLI or via the slider in the GUI.

license-pool-profile-root
    pefng-licenses-enable
    rfp-license-enable
    acr-license-enable
!

You can enable/disable the licenses later if required.


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Highlighted
Contributor I

Re: QUESTION WHEN INTRODUCING LICENSES MANUALLY IN AOS 8.6

Thanks for your answer.

 

In CLI mode, I get an error. It looks that such a commad only works in MM mode, and mime is standalone.

 

No matter, I will enable licenses when I load then, using GUI or enable them in the GUI options, if I load via CLI.

 

I attach the error.

 

Regards.

Highlighted
MVP Guru

Re: QUESTION WHEN INTRODUCING LICENSES MANUALLY IN AOS 8.6

Confusing I know, but you need to enable it at /mm on a Standalone.

 

(Aruba7030) *[mynode] #show roleinfo
switchrole:standalone
(Aruba7030) *[mynode] #cd /mm (Aruba7030) *[mm] #configure t Enter Configuration commands, one per line. End with CNTL/Z (Aruba7030) *[mm] (config) #license-pool-profile-root (Aruba7030) *[mm] (License root(/) pool profile) #

 


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)

View solution in original post

Highlighted
Contributor I

Re: QUESTION WHEN INTRODUCING LICENSES MANUALLY IN AOS 8.6

Thanks you very mutch. I works. I did not know such questions.

Highlighted
MVP Guru

Re: QUESTION WHEN INTRODUCING LICENSES MANUALLY IN AOS 8.6

Glad to hear it :)


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: