Here are some notes
Current config of E1 is :
Tunnel
Trunk
Native = 300 (data)
Tagged = 350 (voice)
I tried putting dumb switch between RAP and phone, and it still does not get an IP address.
Setting static IP on the phone, the phone will still not come up. It sits on "discovering xx.xx.xx.xx (address of phone server interface"
On my controller i am using 3 interfaces, plugged physically into my core switch
1/0 - configured as ACCESS - vlan 300 (data)
1/1 - configred as ACCESS - vlan 350 (voice)
1/2 - N/A
1/3 - configured as ACCESS - vlan 310 (guest wireless)
The port on my core switch for interface 1/1 on the controller is configured as :
interface J4
name "Aruba Master Voice"
tagged vlan 350
untagged vlan 300
exit
With this configuration..............i CANNOT ping anything on the voice vlan even from the controller.
If i change the core switch port to UNTAGGED 350............then i can ping vlan 350 from the controller. However, phone traffic is tagged and still will not pass.
Should one of my interfaces on the controller be configured as TRUNK instead of ACCESS?
Also - my windows laptop with Intel NIC strips 801.q from packets so i was unsuccessful at getting a PCAP with that info. I will continue to try and work on that.