Wireless Access

New Contributor

RAP-2WG and Hotel Captive Portal

I have a RAP-2WG configured in tunnel mode and connecting back to my 651 controller.  Currently everything appears to be working fine.  However, I would like to configure a backup SSID for when I am traveling so that I can authenticate with a hotel's captive portal page.  I have reviewed http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/RAP-with-Hotel-Captive-portal/td-p/18888 (the link in that discussion appears to be dead) and https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-511.  However, I still m struggling to get the backup SSID setup.


Can this be done through the GUI of the controller or does it have to be done via a SSH connection?  Once I establish a SSH connection to the controller, do I need to be in enable mode?

Guru Elite

Re: RAP-2WG and Hotel Captive Portal

Please try the article here:  https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-32


It does it strictly through the commandline, however...

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
New Contributor

Re: RAP-2WG and Hotel Captive Portal

Thanks cjoseph!  I will give that a shot.

Search Airheads
Showing results for 
Search instead for 
Did you mean: