Wireless Access

Reply
Highlighted
Occasional Contributor II

RAP-3WN cant remove the D flag after factory resetting with the button on the bottom.

 
Highlighted
Guru Elite

Re: RAP-3WN cant remove the D flag after factory resetting with the button on the bottom.

Can you please be more specific?  How long has this been happening?

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Highlighted
Occasional Contributor II

Re: RAP-3WN cant remove the D flag after factory resetting with the button on the bottom.

Actually just started. New RAP I installed a couple of weeks ago. Worked
fine until yesterday when I started looking at it and see this in the
controller. Mine is RAP-Imaging.



Could this be a licensing issue? I have probably 1 left from what Airwave is
telling me.
Highlighted
Guru Elite

Re: RAP-3WN cant remove the D flag after factory resetting with the button on the bottom.

What is RAP-Imaging?

Take a look at the output of "show log system 50" on the controller to see if there are any clues to what is happening..


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: