Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

RAP Provisioning

This thread has been viewed 3 times

  • 1.  RAP Provisioning

    Posted May 16, 2013 04:57 PM

    I pre-provisioned a RAP2 device and I want to see the IP address parameters I setup on it when I provisioned it.  The Rap is not currently online but I want to see what I saved when I provisioned it.  How can I do that from the CLI?

     

    Thanks, Tony



  • 2.  RE: RAP Provisioning
    Best Answer

    Posted May 16, 2013 05:01 PM

     

     

     

    You can do show ap database | include <name of the rap> and it should show up on the down list with the ip address it was setup if it came up or you can do show audit-trail and you can see the changes you made 



  • 3.  RE: RAP Provisioning
    Best Answer

    Posted May 16, 2013 05:06 PM

    Well, I did not get any returned data on the first command but the ah audit-trail did the trick.

     

    Thank you kindly.