Dear all,
I'm currently deploying AP 105 into RAP mode with a 3600.
All the configuration seems to be OK as when I'm using local DHCP server, everything is working fine.
Then, I need to set up an external DHCP server without flushing
1 - I've changed the forward mode to "bridge" instead of "tunnel"
2 - Configure helper address to DHCP server (which is not mandatory as WLAN is separate VLAN)
3 - Set up the DHCP server and configure option 43 with the controller IP address
When I reboot the AP, I can see into my DHCP server that the AP gets an IP address in the good range but the IPSec tunnel is not coming up.
When I roll-back everything is working fine.
What did I make wrong? Or did I forget something?
Regards,
Thomas
#3600