05-28-2019 09:27 AM
I'm trying to find some technical documentation or some explication about how to configure Remote Access Point with a Mobility Controller Cluster having 1 Public IP Address for both Controllers.
I heard that NAT wasn't supported with this design on the previous AOS8 versions but that it was ok on the AOS8.4. I can't find any documentations about that.
Could you help me?
Solved! Go to Solution.
05-28-2019 09:45 AM
Pardon typos sent from Mobile
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Re: RAP with Mobility Controller Cluster AOS8.4
06-05-2019 12:42 PM
I configured my cluster with a Public IP on each, but I still don't get how my RAP will get both of these IPs as in the configuration of the RAP we only can advise 1 Public IP on it.