Wireless Access

Reply
Occasional Contributor II

RAP with Mobility Controller Cluster AOS8.4

Hello,

I'm trying to find some technical documentation or some explication about how to configure Remote Access Point with a Mobility Controller Cluster having 1 Public IP Address for both Controllers.

I heard that NAT wasn't supported with this design on the previous AOS8 versions but that it was ok on the AOS8.4. I can't find any documentations about that.

Could you help me?

Regards

Highlighted
MVP Guru

Re: RAP with Mobility Controller Cluster AOS8.4

Now in AOS 8.4 you can define the controllers NAT Public IPs in the Controller Cluster config



Thank you

Victor Fabian

Pardon typos sent from Mobile
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II

Re: RAP with Mobility Controller Cluster AOS8.4

Thank you Victor
Occasional Contributor II

Re: RAP with Mobility Controller Cluster AOS8.4

Hello again,

I configured my cluster with a Public IP on each, but I still don't get how my RAP will get both of these IPs as in the configuration of the RAP we only can advise 1 Public IP on it.

 

Regards,


Christophe

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: