Hello,
I try to connect my users to our WLAN using radius authentication (NPS on Win2012). I followed some tutorials and some solutions that I found here, but it is still not working :(
I allways recieve a authentication error in the VC.
Where can I find further information about this error?
Maybe these lines are useful:
show ap debug radius-statistics
RADIUS Statistics
-----------------
Statistics InternalServer DC02
---------- -------------- ----
In Service: Management Auth Not used Not used
In Service: GerstnerZentrale Not used Not used
Accounting Requests 0 0
Raw Requests 0 0
PAP Requests 0 0
DC02 is my WindowsServer - why is it not used?
Auth Trace Buffer also shows some lines like these:
Oct 23 08:27:24 rad-req -> a4:4e:31:94:ec:64 80:8d:b7:1d:4b:50/t_DC02 51 245 nonasid
Oct 23 08:27:25 rad-resp <- a4:4e:31:94:ec:64 80:8d:b7:1d:4b:50/t_DC02 51 -
Oct 23 08:27:25 eap-req <- a4:4e:31:94:ec:64 80:8d:b7:1d:4b:50 4 490
Oct 23 08:27:25 eap-resp -> a4:4e:31:94:ec:64 80:8d:b7:1d:4b:50 4 17
Oct 23 08:27:25 rad-req -> a4:4e:31:94:ec:64 80:8d:b7:1d:4b:50/t_DC02 52 256 nonasid
Oct 23 08:27:26 rad-reject <- a4:4e:31:94:ec:64 80:8d:b7:1d:4b:50/t_DC02 52 -
Oct 23 08:27:26 eap-failure <- a4:4e:31:94:ec:64 80:8d:b7:1d:4b:50 4 4 server rejected
Oct 23 08:27:26 station-up * a4:4e:31:94:ec:64 80:8d:b7:1d:4b:50 - - wpa2 aes
Oct 23 08:27:26 eap-id-req <- a4:4e:31:94:ec:64 80:8d:b7:1d:4b:50 1 5
Oct 23 08:27:26 eap-start -> a4:4e:31:94:ec:64 80:8d:b7:1d:4b:50 - -
Who is this t_DC02 ?
Thanks, Frantischek