Wireless Access

Reply
Highlighted
Occasional Contributor II

Re: SNMP monitoring

my controller is configure as master-standby this works fine

i will enable snmp to solarwinds upon configuration i can only see the ip of the VRRP which is fine, 

 

but i want to see the 2 hardware to be monitored. how to configure this setup to be able to monitor the 2 hardware, thanks

Guru Elite

Re: SNMP monitoring

You will have to consult SolarWinds on how to do this.  Each device would need to be monitored by its own specific ip address, NOT the vrrp...


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: