Wireless Access

Reply
Highlighted
Occasional Contributor I

Received Signal Strength Indication value

Hi everyone, 
I'm a newbie with Aruba's equipments, and when i use SSH to access the Aruba IAP with these commands: "show ap client-probe-report 0" and "show ap client-probe-report 1" there is a value named RSSI and i'm wondering on what scale is the RSSI measured and what is the max value of it?
Thank you in advanced guys!


Accepted Solutions
MVP Guru

Re: Received Signal Strength Indication value

I'm not sure if that information is available. You probably have read already https://en.wikipedia.org/wiki/Received_signal_strength_indication on the meaning of RSSI which is not very well defined nor how you should use the numbers.

 

I just tested and with a client on the AP, I have seen 89 as maximum value of my measurements.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).

View solution in original post


All Replies
MVP Guru

Re: Received Signal Strength Indication value

I'm not sure if that information is available. You probably have read already https://en.wikipedia.org/wiki/Received_signal_strength_indication on the meaning of RSSI which is not very well defined nor how you should use the numbers.

 

I just tested and with a client on the AP, I have seen 89 as maximum value of my measurements.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: