Wireless Access

last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Redundancy between Controller ports

This thread has been viewed 1 times

  • 1.  Redundancy between Controller ports

    Posted Jun 18, 2019 08:22 PM

    Hi,

    It could be a crazy idea, but i know everything is possible with Aruba!

    I'm testing new design of a local controller in branch office that is connected via IPSec tunnel to master controller.

    is there a possibility to create a failover or redundancy between 2 Controller ports when one port is connected to MPLS circuit and the other port is connected to broadband (2 different vindors), so if the MPLS circuit goes down for any reason, the office will stay up using the broadband connection?

    In another words:

    Port 1 connected to MPLS circuit and active

    Port 2 connected to broadband and standby

    If port 1 disconnected, port 2 will keep the office working, and when port 1 back to work, port 2 will hand the traffic back?

    hope i describe my question well!

    Thank you,

     



  • 2.  RE: Redundancy between Controller ports

    Posted Jun 18, 2019 08:40 PM
    https://www.arubanetworks.com/techdocs/ArubaOS_64x_WebHelp/Content/ArubaFrameStyles/Branch%20Office/BoC.htm


    Thank you

    Victor Fabian

    Pardon typos sent from Mobile


  • 3.  RE: Redundancy between Controller ports

    Posted Jun 20, 2019 02:41 PM

    That is great link, thank you so much for the information, so is there some instructions and maybe exaples of the configuration? that will help allot as i am not an expert.

     

    Thank you,

     



  • 4.  RE: Redundancy between Controller ports
    Best Answer



  • 5.  RE: Redundancy between Controller ports

    Posted Jun 20, 2019 04:29 PM

    Great!

    Thank you,