Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Remote AP And LSM

This thread has been viewed 0 times

  • 1.  Remote AP And LSM

    Posted Dec 09, 2012 07:45 PM

    It is possible to configure a LMS ip address to the RAPS?

     

    For example let say i got a central site with 2 internet connection.

     

    I would like to put the principal ip address and also the backup one which will be the other internet conection

     

    It seems to work but when i reboot the Remote AP it doesnt goes up....

    This configuration is not saved in the RAP if its rebooted?

     

    IS the only way of doing this is by putting a DNS name?  and setting one ip address as the primary when that does not respond then it will propagete the new ip address?

     

    Cheers

    Carlos



  • 2.  RE: Remote AP And LSM

    MVP EXPERT
    Posted Jan 11, 2013 05:26 PM

    I think maybe what you are after is on p212/213 of the 6.1 User Guide, DNS Setting and Backup Controller List. Looks like it is configured by LMS and BLMS via using DNS with multiple IP's configured. 

     

    *I think* :smileyhappy:



  • 3.  RE: Remote AP And LSM

    Posted Jan 14, 2013 05:46 PM

    If you create an AP System Profile and populate the LMS IP and Backup LMS IP fields, does this not work ?