Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Remote Ap will not reboot after upgrade

This thread has been viewed 1 times

  • 1.  Remote Ap will not reboot after upgrade

    Posted Apr 02, 2013 12:12 PM

    I have a remote AP-61 that I moved from  a   650 controller running 6.0.1.0 to another one running 6.1.3.4

    The ap downloads the new version ok but does not reboot.  

    If I reboot it manually it comes up fine. 

    All of the aps are at remote locations and I will not be able to manually reboot them. 

    Any ideas as to why the reboot fails?



  • 2.  RE: Remote Ap will not reboot after upgrade

    EMPLOYEE
    Posted Apr 02, 2013 01:10 PM

    How do you know it upgrades?

     



  • 3.  RE: Remote Ap will not reboot after upgrade

    Posted Apr 02, 2013 01:16 PM

    If I manually power it off and on it comes up  to the new version on boot 



  • 4.  RE: Remote Ap will not reboot after upgrade

    Posted Apr 02, 2013 02:52 PM

    Try upgrading the controller to the last version of AOS on 6.0 which is 6.0.2.0, see if the AP comes up.

    Then upgrade the controller to 6.1.3.4.

     

    Also,

    try enabling ap-debug on the AP possibly network logs as well

    (config) #logging level debugging ap-debug <ap-name>.

    You should see possibly why there if it does not reboot.

     

     

     

     



  • 5.  RE: Remote Ap will not reboot after upgrade

    EMPLOYEE
    Posted Apr 02, 2013 03:03 PM

    How did you "move" it from one controller to another?  Are you sure it is not finding the Old controller when it upgrades, somehow?



  • 6.  RE: Remote Ap will not reboot after upgrade

    Posted Apr 02, 2013 03:44 PM

    Do you have the master and local controller on the same AOS code ?