05-21-2014 02:52 AM
So, simple question.
I just want to reset to factory default an Access Point provisioned and working fine in my controller. Is there any way of remotely reset to factory default an Access Point?
Solved! Go to Solution.
05-21-2014 02:56 AM
Re: Reset to factory default a provisioned access point from controller WebUI or CLI
05-21-2014 12:19 PM
You can also default an AP from a connection to its console port by interrupting the boot process
From the "apboot>" prompt, type purgeenv This erases all the configuration settings on the AP.
Bruce Osborne - Wireless Engineer
All opinions written here are my own and do not necessarily reflect the views and opinions of my employer or Aruba Networks