Hi Guys
Got a bit of an issue that I just can’t seem to figure out.
The network is setup as the following.
Controller connection to the network:
interface vlan 1
ip address 196.25.104.16 255.255.255.0
________________
ip default-gateway 196.25.104.10
Corporate Wifi:
interface vlan 11
ip address 172.20.11.1 255.255.255.0
no suppress-arp
_________________
ip dhcp pool vlan_13
default-router 172.20.13.1
dns-server 196.25.104.10
network 172.20.13.0 255.255.255.0
authoritative
What we are trying to do is to get the people that is connecting on VLAN 11 to access the 196.25.104.0 range. We are trying to achieve it without NAT Inside and I am trying to figure out if I am missing anything on the controller side that I need to add or must we add something extra on the network side also.