Wireless Access

last person joined: 11 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

SNMP trap receivers problems on MCs

This thread has been viewed 0 times

  • 1.  SNMP trap receivers problems on MCs

    Posted Aug 16, 2020 03:11 AM

    Hi community,

     

    I added two SNMP trap receivers on my MCs some days ago, and from then on I see these logs on my MCs:

     

    traprec_log.PNG

     

    It says "engine ID not discovered" for the SNMP trap receivers I added, but I added them in mode "Inform". In this mode I don't have to configure SNMP engine ID like in mode "Trap":

     

    traprec_conf.PNG

     

    What can be wrong? Any ideas?

     

    Regards,

    Julián



  • 2.  RE: SNMP trap receivers problems on MCs

    MVP EXPERT
    Posted Aug 17, 2020 04:38 AM

    Are both of the severs reachable and receiving requests? You can check if they are delayed in the queue or if the queue is empty (show snmp trap-queue).

     



  • 3.  RE: SNMP trap receivers problems on MCs

    Posted Aug 17, 2020 11:42 AM

    Hi Craig,

     

    Yes, the servers are reachable. It seems the queue has things to be sent, look up the output:

     

    fjulianom_0-1597678607696.png

    What can be the problem? Do the destination servers need to be configured in some way?

     

    Regards,

    Julián