Wireless Access

Reply
Contributor I

SSH/WebUI Issues

We are deploying a new 7210 controller and very little configuration has been done on them, before we added licensing for AP/PEF we did a write mem and now can't access via SSH/WebUI. When trying to access web it now gives (securelogin.arubanetworks.com/auth/cp_disabled.html) Any ideas?

Guru Elite

Re: SSH/WebUI Issues

Go into the controller using the console and make the interface that is connected to your lan "Trusted".  For example:

 

config t

interface gigabitethernet 0/0/0

trusted

 

Then try to get in using the web.

 

The problem is, when you add the PEF license, it makes all of the interfaces "untrusted", requiring web authentication, like a Captive Portal.  Making it trusted using the console might fix this.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Frequent Contributor I

Re: SSH/WebUI Issues

Today, I faced this issue but yesterday I did not.

I tried to connect to another network and return to the network then it works without change.

I think sometime it is not stable.

VMC is running on the latest version (8.2.0.2-62929).


Thank you,
Ratchapas S.
Thailand ^_^
Guru Elite

Re: SSH/WebUI Issues

You are commenting on a post 3 years old, that was not a VMC.  Your circumstances are probably different.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Frequent Contributor I

Re: SSH/WebUI Issues

Sorry for that.


Thank you,
Ratchapas S.
Thailand ^_^
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: