Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Separate Vlans for each wireless clients in AP group

This thread has been viewed 1 times

  • 1.  Separate Vlans for each wireless clients in AP group

    Posted May 15, 2017 02:09 PM
      |   view attached

    Hi,

     

    I need to configure different vlans in floorwise wireless clients 

     

    Can anybody suggest me how to acheive this ?

     

    I have attached the network setup



  • 2.  RE: Separate Vlans for each wireless clients in AP group

    EMPLOYEE
    Posted May 15, 2017 02:20 PM

    The big question is, how would you differentiate users on two separate floors, when users can easily roam to another floor?

     

    Users look into this, and they end up putting all wireless users on the same VLAN, because there is not benefit to splitting them up.



  • 3.  RE: Separate Vlans for each wireless clients in AP group

    Posted May 15, 2017 02:57 PM

    Im Sorry for that i dont need for each wireless clients i need it for floorwise say 1st floor- all wlan clients in vlan -851,2nd floor-852...

                        

    and leases for all the wlan clients will get IP from DHCP server connected to edge switch as shown in diagram



  • 4.  RE: Separate Vlans for each wireless clients in AP group

    EMPLOYEE
    Posted May 15, 2017 03:34 PM

    How do you determine what user should be on what floor?