Wireless Access

Frequent Contributor I

Server 2012

We upgraded our DC from Server2008R2SP1 to Server2012 and it seemed to damage our NPS settings for RADIUS.  We use RADIUS auth for management authentication for all Aruba controllers.  I am able to log into the controllers with my domain account however, all domain users can.  Anyone have an updated doc for this setup?

Frequent Contributor II

Re: Server 2012

Do you have a seperate policy in NPS in place for the controller management authentication? Check the event viewer if the approriate policy is being hit when you log into the controller.


What kind of config do you have in place on the controller-side? Are you using a seperate RADIUS-server profile + server group for the management authentication? It is ussual to this so you can have different NAS-Identifiers for management authentication and for example 802.1X. These NAS-Identifiers should match your NPS policies.

ACMX#255 | ACDX#742 | ACCX#746 | AMFX#25 | ACMP | ACCP | AWMP
Frequent Contributor I

Re: Server 2012

It was a corrupted upgrade from server 2008 -> 2012.  Created a new policy on a fresh build and all is well.  Thanks for the reply.

Search Airheads
Showing results for 
Search instead for 
Did you mean: