10-17-2013 08:23 AM - edited 10-17-2013 08:24 AM
You would have to create a new ap-group. You would also have to create a new regulatory domain profile that only has that single channel and assign it to that ap-group. Reprovision the access point to that new ap-group.
Alternatively, you can create an AP-Specific configuration and create a new Regulatory domain profile for that AP-Specific Configuration.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Re: Set Specific Channel on AP-105
10-17-2013 08:26 AM
Here is one method, for the specific AP in question:
1. Turn off ARM channel changing (set to maintain)
2. Set Default channel in dot11g Radio Profile to the desired 1,6,11
99.9% of the time I would just let Aruba ARM do-its-thing and select the best channel... remember the RF environment is constantly changing, the AP needs to 'keep up'.