Hope this helps:
ap-group "Test"
enet1-port-profile "test-wired-port-profile-vlan10"
(controller) #show ap wired-ap-profile test-wired-access-vlan10
Wired AP profile "test-wired-access-vlan10"
------------------------------------------------
Parameter Value
--------- -----
Wired AP enable Enabled
Forward mode tunnel
Switchport mode access
Access mode VLAN 10
Trunk mode native VLAN 1
Trunk mode allowed VLANs 1-4094
Trusted Trusted
Broadcast Broadcast
(controller) #show ap wired-port-profile test-wired-port-profile-vlan10
AP wired port profile "test-wired-port-profile-vlan10"
------------------------------------------------
Parameter Value
--------- -----
Wired AP profile test-wired-access-vlan10
Ethernet interface link profile default
Shut down? No
Remote-AP Backup Enabled
AAA Profile N/A
Bridge Role N/A
Time to wait for authentication to succeed 20 sec