Wireless Access

Reply
New Contributor

Re: Short Flat Ethernet cables

I know this discussion is from a while back but why can't you use the AP-CBL-ETH10 pack?  These seem to be the same exact jumper cable that the mounting kit includes, just a few cm's longer.. 

Occasional Contributor II

Re: Short Flat Ethernet cables

I didn't know that part existed.  How do you find out about parts like that?  It sounds like it would work, but I can't find a picture of it online to verify that it doesn't have the boot that gets in the way by sticking up too far and pushing the ceiling tile up on the AP325.

 

Mostly I no longer have this problem any more because though we've still got AP325's installed, we've started installing AP515's now as we upgrade older AP's.  The AP515 solves this problem by having the network jack connect to the AP parallel to the ceiling rather than perpendicular to it.

New Contributor

Re: Short Flat Ethernet cables

From the Aruba catalog.  Same exact boot as the jumper cable.  We had the issue with the 303H's where these worked perfectly while lying them flat on the ground with the wall gange kit that it comes with. 

Highlighted
Occasional Contributor II

Re: Short Flat Ethernet cables

Is this a paper catalog you're talking about?

New Contributor

Re: Short Flat Ethernet cables

Its on the 303H white paper:

https://www.arubanetworks.com/assets/ds/DS_AP303H.pdf

JW072A - AP-CBL-ETH10 10-pk Short Ethernet Cable

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: