Wireless Access

Reply
Occasional Contributor I

Single SSID with multiple VLANs

Can we input multiple VLANs per SSID, in Virtual AP under AP Configuration so that we can use only 1 single SSID for the whole company and transfer the user to the designated VLAN based on the User Role with Role VLAN ID?

Guru Elite

Re: Single SSID with mulitple VLANs

Yes, you can return a VLAN assignment in your RADIUS response or assign VLANs to user roles and then return the user role. 

You do not have to add all the VLANs to the virtual-ap. 

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor I

Re: Single SSID with mulitple VLANs

Hi Cappalli,

 

Thanks for your response. The authentication is MAC address using internal database. You mean we have to create a Radius Server (NPS) for this one?

 

I have tried creating an account in the USER-ROLE with ROLE VLAN ID = 10 and bind it to the role in the internal database. But the user still getting the VLAN 20 which is indicated on the Virtual-AP once it connects.

 

 

 

 

Guru Elite

Re: Single SSID with mulitple VLANs

Yes, you could use the internal database but it is not very flexible. 

Are you clearing the user out of the user-table each time you test? 

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: