Wireless Access

Reply
Highlighted
Guru Elite

Re: Site Survey with Standalone AP

Make the ARM mode Disable.  Then the AP will set itself to the channel and power in the radio profile.  Scanning has no effect when ARM is disabled.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor II

Re: Site Survey with Standalone AP

How can you find what dBm your AP is set at in the console?  Thanks

Highlighted
Guru Elite

Re: Site Survey with Standalone AP

Highlighted
Occasional Contributor II

Re: Site Survey with Standalone AP

I will check it out  ----  many thanks!!