12-01-2017 08:08 AM
We've got a few controller-only VLANs set up running source nat inside and local DHCP scopes on the controller, but I'm doing some testing to see about using our existing external DHCP server for these VLANs. So far I'm not having much luck. Here's the setup:
Role: vending, VLAN51
any any dhcp permit
block internal networks (10.x)
source nat inside
DHCP Helper Address: 10.64.10.23 (the controller can reach this)
This VLAN isn't associated with any physical port or port channel.
Will this not work, or am I just missing something dumb?
Solved! Go to Solution.
12-01-2017 08:29 AM
Unfoortunately, it will not work across a source-nat boundary.
There has been alot of back and forth on this in the distant past, and since ArubaOS 6.2 the controller source ip in the DHCP packet has always been the controller uplink IP instead of the unroutable default gateway of natted clients. This is the reason why it wold not work with natted clients on the controller.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars