Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Static RAP inner IP address, multiple controllers

This thread has been viewed 1 times

  • 1.  Static RAP inner IP address, multiple controllers

    Posted Dec 20, 2016 08:42 PM

    Is there any way to support a separate static inner IP address for a RAP using 2 different controllers?

     

    I can specifiy a static inner IP on the RAP whitelist on the master controller, but I assume this means it would use the same address no matter what controller it connects to.

    We can configure a RAP VPN pool with different addressing on each controller but we would like to use static IP addressing for monitoring purposes.



  • 2.  RE: Static RAP inner IP address, multiple controllers

    EMPLOYEE
    Posted Dec 20, 2016 08:50 PM
    Even if the RAP could maintain the same nonroutable IP address, how would you tell the infrastructure that the same nonroutable IP address resides on one controller vs. another?


  • 3.  RE: Static RAP inner IP address, multiple controllers

    Posted Dec 20, 2016 08:53 PM

    I should clarify - we would like to be able to specify a different static inner-ip address for a given AP on 2 different local controllers.

     

    From the GUI it looks like you can only specific a single static inner-ip in the RAP whitelist?



  • 4.  RE: Static RAP inner IP address, multiple controllers

    EMPLOYEE
    Posted Dec 20, 2016 08:53 PM
    Correct.