I have a 3200 controller running 6.1.3.8 and it looks like devices are hanging on for long periods of time based on the number of clients connect to it. If I reboot the controller will it release all of the clients?
Thank you. That did the trick "for now". This install is in a hotel and I am also wondering it I am running out of IP address. Currently the controller is running DHCP.
Currently it is set to:
That's a long time. That means it could be up to 4 hours after your client leaves the network that they are cleared out of the user table. You may want to try and lower it to 1800 seconds (30 mins).
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.