Wireless Access

Reply
Highlighted

Terminating GRE tunnels on VRRP

Hi All,

 

Is it now possible to terminate GRE tunnels on the VRRP IP address?

 

I believe I read it in some release note but can someone confirm please?

 

Thanks

James


Cheers
James
----------------------------------------------------------------------
--------------------------@whereisjrw--------------------------
---------------------------------blog-------------------------------
ACCX #540 | ACMX #353 | ACDX #216 | AMFX #11
----------------------------------------------------------------------
----------------------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.

Accepted Solutions
Highlighted
Guru Elite

Re: Terminating GRE tunnels on VRRP

yes.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post


All Replies
Highlighted
Guru Elite

Re: Terminating GRE tunnels on VRRP

yes.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post

Highlighted
Valued Contributor I

Re: Terminating GRE tunnels on VRRP

I've been doing this for a while with good results. Never knew it was in doubt??? Can't remember the first version I did it in, but it was ages ago...

 

Cheers!

Kudos appreciated, but I'm not hunting! (ACMX 104)
Highlighted

Re: Terminating GRE tunnels on VRRP

Thanks guys.

FYI The controllers are currently on 6.1.2.5.

Cheers
James
----------------------------------------------------------------------
--------------------------@whereisjrw--------------------------
---------------------------------blog-------------------------------
ACCX #540 | ACMX #353 | ACDX #216 | AMFX #11
----------------------------------------------------------------------
----------------------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Highlighted
Aruba Employee

Re: Terminating GRE tunnels on VRRP

I've been doing it since early 3.x through 6.1.3.2, no worries.

Highlighted

Re: Terminating GRE tunnels on VRRP

Working fine now. I was setting the source address on the master as the VRRP address which didn't work. When I changed it to the controllers IP it worked fine.

 

Thanks


Cheers
James
----------------------------------------------------------------------
--------------------------@whereisjrw--------------------------
---------------------------------blog-------------------------------
ACCX #540 | ACMX #353 | ACDX #216 | AMFX #11
----------------------------------------------------------------------
----------------------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Highlighted
MVP

Re: Terminating GRE tunnels on VRRP

I'm confused now.

 

Tunnels from local controllers back to the headquarters have been rock-solid until I went from single master to VRRP-pair redundant master. Now they seem to forget to tunnel traffic.

 

I left the tunnel configs exactly the same on the master and the local controllers, with the addition that I've duplicated the master's settings on the backup master -- that is both of them list the tunnel source as the master (virtual) IP.

 

Should I set the tunnels on the masters as sourced from their IP real addresses?

I don't want duplicate tunnels from locals to both masters, I just want one tunnel to the master-in-charge, so do I leave the locals pointing to the VRRP address?

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: