Wireless Access

last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Throughput from an Instant

This thread has been viewed 2 times

  • 1.  Throughput from an Instant

    Posted Aug 10, 2017 09:20 AM

    Hi,

     

    I have an IAP 305 cluster that connects into AirWave and we have an application that seems to be running slow in our stores.  Our wireless handhelds use a couple of applications, however, one of them seems to be running very slowly.  I do not believe that this is RF but I need to prove it... Is there anything either in the CLI or Airwave where I can view throughput or response for an application.  If not could I get usage stats for a handheld that might prove useful.

     

    Thanks,



  • 2.  RE: Throughput from an Instant
    Best Answer

    Posted Aug 10, 2017 09:31 AM
    >From airwave search for the device using the MAC address and check the SNR of the client (25db and up) and also the RF quality( High utilization , interference , Layer 2 retries, etc..) of the AP itself

    Get Outlook for iOS


  • 3.  RE: Throughput from an Instant

    Posted Aug 10, 2017 04:52 PM

    Thank you, I apprecite your help.

     

    I can look at the SNR in AirWave but I am unsure about how I would find the High utilization , interference and Layer 2 retries on the CLI.

     

    Jonathan