Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Time Based SSID Broadcast - Controller and Instant

This thread has been viewed 2 times

  • 1.  Time Based SSID Broadcast - Controller and Instant

    Posted Apr 21, 2017 05:47 AM

    Hi All

    I was hoping there is a way to set a SSID to only broadcast at certain times.


    On Controllers I know about the "Deny Time Range" option, however the SSID is still broadcasting during that time, is there a way to set profile to stop broadcasting all together during a specific time?

     

    On iAP I see there options for Time Range (this under edit for the SSID and expanding Advanced) - however I am unfamiliar with the feature on iAP, setting a time range here will it only broadcast during that time or is it also a Deny like on the Controllers?



  • 2.  RE: Time Based SSID Broadcast - Controller and Instant

    MVP EXPERT
    Posted Apr 21, 2017 06:08 AM

    Hey, it will disable the SSID.

     

    time-range.JPG



  • 3.  RE: Time Based SSID Broadcast - Controller and Instant

    Posted Apr 21, 2017 07:51 AM

    Awesome THX Zalion

    Is there away to achieve the same on a Controller (3600 and 7210)?



  • 4.  RE: Time Based SSID Broadcast - Controller and Instant

    EMPLOYEE
    Posted Apr 21, 2017 08:17 AM

    Hi,

     

    you can deny connections but the SSID will still be visible.

     

    You'll configure this under VAP - deny timer range.

    Timer range is configured under Access Control - Timer range 

    or conf t, timer-range on the CLI.

     

    Hope it helps