12-06-2017 10:47 PM
assuming we have a wireless controller in maste/standalone mode in dmz with a connected layer3 nework wireless clients should be bridged into.
We have another location with one master/standalone wireless controller and campus aps connected to it serving some ssids with local networks.
Is it possible to:
- create a layer2 vpn between these controllers
- configure an additional ssid using the layer2 network which is bridged into the vpn tunnel in order clients are bridged into the layer3 network connected to the controller located in the dmz?
Thanks and kind regards,
Solved! Go to Solution.
12-07-2017 01:57 AM
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos