Wireless Access

last person joined: 20 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Tunnels for Guest traffic to DMZ VRRP address

This thread has been viewed 5 times

  • 1.  Tunnels for Guest traffic to DMZ VRRP address

    Posted Feb 13, 2020 02:53 PM

    How do you configure a tunnel for guest traffic from local to DMZ controllers when the DMZ controllers have a VRRP address? Is there anything else different or needed besides making the tunnel destination the VRRP address of the DMZ controllers? If I use the physical IP of the DMZ controller the tunnel comes up but if I use the VRRP address the tunnel goes down. I know there are issues with loops and I want to prevent this by using the VRRP address.



  • 2.  RE: Tunnels for Guest traffic to DMZ VRRP address

    MVP GURU
    Posted Feb 13, 2020 04:44 PM

    You can certainly use a VRRP address as source and for destination of a GRE tunnel on aruba. Check out this post and see if this answers your question.

     

    https://community.arubanetworks.com/t5/Controller-Based-WLANs/Create-GRE-tunnel-between-VRRP/ta-p/180486