Wireless Access

Reply
Highlighted
Occasional Contributor II

Tunnels for Guest traffic to DMZ VRRP address

How do you configure a tunnel for guest traffic from local to DMZ controllers when the DMZ controllers have a VRRP address? Is there anything else different or needed besides making the tunnel destination the VRRP address of the DMZ controllers? If I use the physical IP of the DMZ controller the tunnel comes up but if I use the VRRP address the tunnel goes down. I know there are issues with loops and I want to prevent this by using the VRRP address.

Highlighted
Frequent Contributor I

Re: Tunnels for Guest traffic to DMZ VRRP address

You can certainly use a VRRP address as source and for destination of a GRE tunnel on aruba. Check out this post and see if this answers your question.

 

https://community.arubanetworks.com/t5/Controller-Based-WLANs/Create-GRE-tunnel-between-VRRP/ta-p/180486

 

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX | ACCP | ACSA | CCNP | CCDP | CCNA Wireless
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: