Wireless Access

Reply
New Contributor

UAP-345 Clear OS Can't boot WebUI

Hello guys

 

I have a UAP-345

and i boot into apboot mode type clear.

Now ap can not boot normally.

how would i reinstall the image?

Thank you

 

 

 

 

Guru Elite

Re: UAP-345 Clear OS Can't boot WebUI

Do you have the output of the console?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
New Contributor

Re: UAP-345 Clear OS Can't boot WebUI

Hello

The console output is following:


HELO
5.0202-1.0.38-161.122

CPU0
L1CD
MMUI
MMU8
CODE
ZBBS
MAIN
NVRAM memcfg 0x41427

MCB chksum 0xa259e84b, config 0x41427

DDR3-1600 CL11 total 512MB 2 16bits part[s] %1 SSC


DDR test done successfully


Loading image 0...

Validating image 0...

Uncompressing image 0...

Booting image 0...

 

APBoot 2.3.0.8 (build 62499)
Built: 2017-11-27 at 16:00:23

Model: AP-34x
DRAM: 512 MiB
NAND: ECC BCH-4, ONFI, Manuf ID: 0xef, Chip ID: 0xf1 (Winbond W29N01HV), page size: 2048, OOB size: 64, device size: 128 MiB
PCIE1: link up
PCIE2: link up
Power: 802.3af POE
In: serial
Out: serial
Err: serial
Net: eth0, eth1
Radio: bcm43465#0, bcm43465#1
Reset: cold
FIPS: passed

Hit <Enter> to stop autoboot: 2  0
apboot>
apboot>
apboot>
apboot>
apboot>
apboot> print
autoload=n
autostart=yes
baudrate=9600
boardname=Masterson
bootargs=console=ttyS0,9600n8 rdinit=/sbin/init ubi.mtd=pdata ubi.mtd=aos
bootcmd=boot ap
bootdelay=2
bootfile=arm64.ari
ethact=eth0
ethaddr=38:17:c3:c1:7f:ba
mtddevname=aos
mtddevnum=3
mtdids=nand0=nand0
mtdparts=mtdparts=nand0:3m(apboot),512k(panic-dump),2m(pdata),-(aos)
os_partition=1
partition=nand0,3
servername=aruba-master
stderr=serial
stdin=serial
stdout=serial

Environment size: 472/65531 bytes
apboot>
apboot>
apboot>
apboot> boot
Booting OS partition 1
Checking image @ 0x2000000
Invalid image format version: 0xffffffff
Checking image @ 0x0
Invalid image format version: 0xffffffff
Setting SGMII Calibration value to 0xb
Found external PHY 84880 (B0) (PHY_ID: ae025159)
Loading PHY firmware for device 0x308001e ...
............................................................
...............................................
Done. Firmware Size = 106882:0x1a182 bytes, Simple Checksum: 0x7a7d0d68
PHY successfully came out of reset
PHY Firmware is loaded with Good CRC.
PHY Fimware Version(Main.Branch.Build): 2.01.00
PHY Firmware Loaded Successfully
uTimeOut for status = 1
Energy detection is used as SFP module insertion detection
eth0: link up, speed 100 Mb/s, full duplex
DHCP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 224
*** Unhandled DHCP Option in OFFER/ACK: 224
DHCP IP address: 192.168.1.110
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.1.99
DHCP DNS server: 208.91.112.53
DHCP DNS domain:
ADP multicast 1
ADP broadcast 1
ADP multicast 2
ADP broadcast 2
ADP multicast 3

Retry count exceeded
DNS request 1 for aruba-master. to 208.91.112.53
DNS request 2 for aruba-master. to 208.91.112.53
DNS request 3 for aruba-master. to 208.91.112.53
DNS request 4 for aruba-master. to 208.91.112.53

Retry count exceeded; starting again
eth1 link is down
eth0: link up, speed 100 Mb/s, full duplex
DHCP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 224
*** Unhandled DHCP Option in OFFER/ACK: 224
DHCP IP address: 192.168.1.110
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.1.99
DHCP DNS server: 208.91.112.53
DHCP DNS domain:
ADP broadcast 3
ADP multicast 4
ADP broadcast 4
ADP multicast 5
ADP broadcast 5

Retry count exceeded
DNS request 1 for aruba-master. to 208.91.112.53

Abort
apboot>
apboot>
apboot>
apboot>

Guru Elite

Re: UAP-345 Clear OS Can't boot WebUI

It is looking for a controller.  Please try this:  https://community.arubanetworks.com/t5/Controller-less-WLANs/Bypassing-Controller-discovery-in-UAP/ta-p/458865

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
New Contributor

Re: UAP-345 Clear OS Can't boot WebUI

 

The instruction seems to have no effect.

 

 

----------------------------

apboot>
apboot>
apboot>
apboot>
apboot>
apboot>
apboot>
apboot> print
autoload=n
autostart=yes
baudrate=9600
boardname=Masterson
bootargs=console=ttyS0,9600n8 rdinit=/sbin/init ubi.mtd=pdata ubi.mtd=aos
bootcmd=boot ap
bootdelay=2
bootfile=arm64.ari
ethact=eth0
ethaddr=38:17:c3:c1:7f:ba
mtddevname=aos
mtddevnum=3
mtdids=nand0=nand0
mtdparts=mtdparts=nand0:3m(apboot),512k(panic-dump),2m(pdata),-(aos)
os_partition=1
partition=nand0,3
servername=aruba-master
stderr=serial
stdin=serial
stdout=serial
uap_controller_less=1

Environment size: 496/65531 bytes
apboot>
apboot>
apboot> save
Saving Environment to UBI...
Writing to UBI... done
apboot>
apboot>
apboot>
apboot>
apboot> boot
Booting OS partition 1
Checking image @ 0x2000000
Invalid image format version: 0xffffffff
Checking image @ 0x0
Invalid image format version: 0xffffffff
eth0: link up, speed 100 Mb/s, full duplex
DHCP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 224
*** Unhandled DHCP Option in OFFER/ACK: 224
DHCP IP address: 192.168.1.110
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.1.99
DHCP DNS server: 208.91.112.53
DHCP DNS domain:
ADP multicast 6
ADP broadcast 6
ADP multicast 7
ADP broadcast 7
ADP multicast 8

Retry count exceeded
DNS request 1 for aruba-master. to 208.91.112.53
DNS request 2 for aruba-master. to 208.91.112.53
DNS request 3 for aruba-master. to 208.91.112.53
DNS request 4 for aruba-master. to 208.91.112.53

Retry count exceeded; starting again
eth1 link is down
eth0: link up, speed 100 Mb/s, full duplex
DHCP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 224
*** Unhandled DHCP Option in OFFER/ACK: 224
DHCP IP address: 192.168.1.110
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.1.99
DHCP DNS server: 208.91.112.53
DHCP DNS domain:
ADP broadcast 8
ADP multicast 9
ADP broadcast 9
ADP multicast 10
ADP broadcast 10

Retry count exceeded
DNS request 1 for aruba-master. to 208.91.112.53
DNS request 2 for aruba-master. to 208.91.112.53

Abort
apboot>

Guru Elite

Re: UAP-345 Clear OS Can't boot WebUI

Did you try executing the factory reset procedure?

Screenshot 2019-02-01 at 04.03.20.png


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Guru Elite

Re: UAP-345 Clear OS Can't boot WebUI

Did you try executing the factory reset procedure?

Screenshot 2019-02-01 at 04.03.20.png


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor I

Re: UAP-345 Clear OS Can't boot WebUI

If you can put in a DNS entry for aruba-master to point to one of your controllers it should connect and pull down another image.

 

Brady

New Contributor

Re: UAP-345 Clear OS Can't boot WebUI

Hello 

I use reset button to factory reset , and it seems to have no change.

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: