Wireless Access

Hello All,

Can someone please clarify, when i look in the audit logs on a MM why it constantly repetes the below

Aug 13 18:18:21 ofc_cli_agent[7354]: USER:admin@serial NODE:"/mm/mynode" COMMAND:<openflow-profile controller-ip masterip> -- command executed successfully
Aug 13 18:18:21 ofc_cli_agent[7354]: USER:admin@serial NODE:"/mm/mynode" COMMAND:<openflow-profile bind-vlan 1-4094> -- command executed successfully
Aug 13 18:18:21 ofc_cli_agent[7354]: USER:admin@serial NODE:"/mm/mynode" COMMAND:<openflow-profile openflow-enable> -- command executed successfully
Aug 13 18:18:21 ofc_cli_agent[7354]: USER:admin@serial NODE:"/mm/mynode" COMMAND:<write memory> -- command executed successfully

When it says USER:admin@serial  i would have thought this implies someone has consoled into the device and is making changes however this seems to be automated... Can someone please explain this to me?

Thanks,

Have you ever configured your MM to use activate?

Doesnt look like it:

Activate Sync Status
--------------------
Type Last Success Last Failure
----------------- ------------------- -------------------
Activate Login N/A N/A
Register N/A N/A
Cert Upload N/A N/A
AP Whitelist Sync N/A N/A
Provision Login N/A N/A
Device Whitelist Sync N/A N/A

Any commands to get the information you require?

Thanks,

We are using standard provisioning rules on the MM/MD's

Is it a hardware MM or a VMM?

2 x VMM running active/backup

Ok.

You should open a TAC case, then.  A bug has been identified that shows admin@serial as an internal process, but for now it seems to only be limited to the activate feature.  From your description, you do not match that use case, so please open a TAC case, so we can understand your situation.